WHY CAN’T I GET ALL OF THE SOLVENT OUT OF MY CAN USING THE CAN TAPPER?
It is important to first understand that the unit moves solvent using differential pressure. Solvent evacuates from the cans which are at a [...]
7
08, 2017
18
07, 2017
TIME IT TAKES TO PULL A FULL VACUUM ON A BHO BUSTER SYSTEM
The amount of time it takes to pull a full vacuum on a BHO Buster system varies depending on the CFM of the [...]
17
07, 2017
HOW MUCH SHOULD THE BOLTS ON THE DOUBLE BOLT CLAMPS BE TIGHTENED DOWN?
The double bolt clamps should be evenly clamped down on both sides, switching from one to the other consistently. A washer should be [...]
15
07, 2017
WHY DOES BHO BUSTERS ONLY USE DOUBLE BOLT CLAMPS?
The double bolt clamps feature a bolt on each side of the clamp to evenly distribute the pressure between two bolts instead of [...]
13
07, 2017
HOW LONG DOES IT TAKE TO COMPLETE A FULL RECOVERY?
Recovery time depends on the temperature of the collection vessel. We recommend 70-80 degrees Fahrenheit, though temperatures up through 110 are entirely safe. [...]
11
07, 2017
Can I run the BHO Busters System passively without a recovery pump?
You can run system passively without a recovery pump. The process of passive recovery takes significantly longer. Our system relies on the recovery [...]
15
03, 2017
9, 5lb Collection Chambers – Ready to go!
Get your BHO Busters Closed Loop Extraction System today!
2
03, 2017
BHO Extractor Pressure Testing
Pressure testing new units. Up to 250 psi. It should never get over 60 if your doing it right.
14
02, 2017
BHO Buster Decals Have Arrived!
Finally got our new decals! BHO Buster!!! New logo/decal pictured on the 2-LB & 5-LB Closed-Loop Hydrocarbon Extraction System/Kit BHO collection chamber.
7
02, 2017
